|
 |
| |
| .Multi-Finishing Wheels |
| |
| ..You need to know all about Multi-Finishing Wheels ! |
 |
| Multi-finishing Wheels are suitable for fine finishing and offer you an excellent job on a wide variety of material such as stainless steel, titanium alloy etc. |
 |
| |
| Multi-Finishing Wheels are highly conformable, soft wheels that create uniform attractive final finishes on ferrous and non-ferrous metals. They are tough enough to finish edges and welds & soft enough to final finish large surfaces. Designed for top performance and value on a variety of critical deburring and finishing applications. |
| |
| The open web construction of these wheels removes surface contamination and dirt while it resist surface loading and does not re-deposit contaminates onto the work piece. Silicon Carbide mineral offers a unique bright |
| surface that is often desired by stainless steel manufacturers. |
| |
| This family of unitized wheel products is especially well suited for a broad range of deburring and finishing needs. The unique resin system helps to minimize smearing and the wheels show superior performance on stainless steel, titanium and high nickel alloys. |
| |
|
| Multi-Finishing Wheels are easier to use that buffs, compounds and other finishing abrasives and like all FibraNEX® products, they are produce consistent results. They are an excellent starting point when the application calls for fine finishing or cleaning. |
|
|
| We have never ever offered GOOD and BETTER products ! |
 |
|
 |
| FibraNEX represent products that are unmatched in the industry and provide the lowest total cost for the application. |
|
|
| .Application types : |
• Cleaning of composite parts,
• Light oxide removal,
• Deburring and cutlery edge radius,
• General use deburring,
• Blending, finishing, deburring jet blades,
• Final finish of aluminum extrusions,
• Finishing aircraft components,
• Selective polish on nameplates,
• Fine thread polishing,
• Mold polishing,
• Polishing turbine blades,
• Polishing gun barrels,
• Polishing, finishing golf club heads,
• Polish bevel edge of furniture glass,
• Polishing jewelry prior to plating, |
 |
|
|
| .Specifications : |
|
| ... |
Type |
Density |
Mineral Types |
Colour |
Grit # |
Sizes in Stock (mm) |
| A |
| Soft , |
| Medium , Hard , |
| Very Hard |
|
Green Silicone Carbide |
Green |
80 - 1200 |
203 x 25 & 203 x 50 |
| Available Sizes (mm) |
| Diameter : |
100, 152, 203, 254, 305, 354, 406, 500 |
| Fibranex |
| Thickness : |
10, 25, 50, 75, 100, 150, 200 |
|
.Grit # |
. 80 , 120 , 150, 180 , 240 , 320 , 400 , 600 , 800 , 1000 , 1200 |
.Flange Hole |
. Flange hole is 19 mm. unless otherwise requested. |
.Applications |
|
.Special Notes |
.-Special sizes may be manufactured on customer request.
.-Maximum width is 200 mm. and minimum width is 10 mm.
... * Larger width than 200 mm. may be manufactured by glueing with specially formulated chemicals to prevent polishing .. .......lines betweeen the wheels.
.-Maximum diameter is 500 mm. and minimum diameter is 102 mm.
.-Maximum arbor hole is 180 mm. and minimum arbor hole is 10 mm. or without arbor hole.
|
|
|
